ProSport Shortened Adjustable Drop Links Kit

Pair of ProSport Shortened Front Anti-Roll Bar Drop Links (as shown in picture) to fit the following:
Audi A3 8L, Seat Leon 1M, Skoda Octavia 1U, Seat Toledo 1M, VW New Beetle 9C, VW Bora A4/1J, VW Golf Mk4 8L - NOT suitable for 4Motion models. ONLY suitable for vehicles which have been lowered by 25-60mm. These Drop Links should not be fitted to a vehicle which has been lowered by an amount greater or lower than this figure.

This Droplink Kit allows the following Size Ranges (Measured Center to Center of Balljoint):
Length Min 115mm - Max 160mm

M10 fitting. All steel construction.

For use on Aftermarket and O/E Spec Anti Roll Bars

ProSport Part Number: 130002

ProSport Universal Adjustable Drop Links Kit

3 Piece Kit allows the following Size Ranges (Measured Center to Center of Balljoint):

Length Min 150mm - Max 200mm
Length Min 220mm - Max 265mm
Length Min 270mm - Max 320mm

Can be used on the Front or Rear depending on the type and length of the ones on your vehicle

For use on Aftermarket and O/E Spec Anti Roll Bars

ProSport Part Number: 130008

ProSport Coilover Adjustment Spanner Wrench Tool Set

Description: A set of two spanners to fit the ride height adjuster rings and locking rings on a Prosport Coilover Kit. Made from mild steel.
Complete with a storage case to keep the spanners safe and in good condition.
Foam lining with precision cut outs to store spanners securely.
The larger spanner has a 1/2″ Square aperture to enable use with a breaker bar.
These spanners have a slim profile for ease of use in tight spaces.
Each spanner has a variable radius for a wide compatibility range.

ProSport Part Number: 130009

ProSport Rear lowering brackets / shackle kit to fit VW Caddy Mk3 & Mk4 2004-2020

This Shackle Kit Fits these VW models:
Caddy Mk3 2K, made from 2004-2010 – 1.4 MPI / 1.6 MPI / 1.9 TDI / 2.0 SDI / 2.0 TDI
Caddy Mk3 Facelift 2K, made from 2010-2015 – 1.2 TSI / 1.6 LPG / 1.6 TDI / 2.0 TDI
Caddy Mk4 2K SA, made from 2015-2020 1.0 TSI / 1.2 TSI / 1.4 TSI / 2.0 TDI
ONLY suitable for FWD models. ONLY for vehicles with single rear leaf springs, this kit will NOT work for vehicles that have double rear leaf springs (these are fitted to some 7-Seater and disability converted vehicles).

Lowering amount:
This Shackle Kit / Bracket Kit will lower the rear of your VW Caddy by 50-85mm
M10 fitting. All steel construction.

Installation:
This product must ONLY be installed by a qualified vehicle technician, preferably with experience of lowering Caddy vans using this type of kit.

ProSport Part Number: 150999